Milling

CoroMill® 360
heavy duty face mill

The 60 degree heavy duty face milling cutter with a large 28 mm insert, 8 mm thick, offers an outstanding performance in the application area for heavy industry segments. With a maximum cutting depth of 18 mm together with high feed per tooth, CoroMill 360 provides a productivity boost that is tough to beat.

The unique cassette solution with wedge-clamped inserts gives a high security and easy handling when indexing inserts.


Diameter range: 160-500 mm
Robust cutter body produced in through-hardened steel – reduced risk for cutter failure and minimum machine downtime
Good basic accuracy, precise cassette location against cutter body
Quick indexing of inserts with the wedge clamp solution, only a ½ turn of the wedge screw releases the insert






Unique cassette solution

The same body is used for both cassette sizes
Separate wedge and cassette for respective insert sizes. When replacing ensure you have the correct size of each.

Inserts
Insert sizes: 19 and 28 mm with 4 edges
Insert grades for steel, cast iron and stainless (ISO-P, ISO-K, ISO-M)
Light cutting, positive geometry (angle of inclination= 14°)
Wide parallel land for best surface finish in any area of heavy duty milling




previous



© Sandvik CoromantLatest update: 03/02/2009 03:16:04 PM

Print this page | Send this page | Site Map | Contact Us | Comment this page