Coolant supply; vital for titanium milling
CoroMill 690 is designed with end coolant providing the best chip evacuation when face and shoulder milling whether cavity or pocket milling.
During cutting, the chips can be prone to sticking to the cutting edge. This means that the next cutter rotation is re-cutting the chip. By equipping every insert pocket with threaded coolant holes with nozzles for High Pressure coolant delivery, you can apply maximum coolant where required. This effectively eliminates the problem for a constant cutting edge performance.
Threaded coolant holes
The option is available to restrict the number of holes that coolant is delivered through, allowing for maximum flow where required. |
 |
| | Coromant CaptoŽ
The CoroMill 690 cutter program takes full advantage of Coromant Capto’s stability and modularity, with excellent shank clearance essential when machining long overhangs and reaches.
Assortment
 | Cutters available in diameters 2.000 - 3.000" (50-100 mm).
Grades GC1030 and GC2040 in –SL geometry, optimized for edging in titanium. |
2 insert styles:
iC .032" (14 mm) – for larger diameters
iC .062" (10 mm) – smaller diameters and
closer pitch on large diameter for
profiling
|