CoroMill® 300 - Round insert cutter
|
|
CoroMill 300 is a positive round insert concept. The positive concept is used for machines with high and low power.
It also generates low cutting forces and little heat when machining with small dephts of cut. This allows the table feed to be increased 5 – 10 times compared to general machining.
CoroMill 300 is suitable for a broad range of operations such as face milling, pocketing, and profiling.
| Diameter range: |
| 10 - 42 mm (neutral design) |
| 25 - 125 mm (positive design) |
|
 previous
|