| First choice recommendation |
|
Component dia. 6-32 mm
Insert: VCEX 110301L-F 1020
Holder: SVJBL 1212K-S-B1
Start value: low alloy steel material
vc: 120 m/min ap: 3 mm fn: 0.08 mm/rev
|
|
|  |  
 View the small part machining video
|
Tool information
Nose radius: 0 and 0.1 mm
Hand: Available in left and right handed versions.
Grades: 1020, 5015 and H13A
Geometry’s: L-F and R-F
Insert tolerances: Repeatability: +/-0.025mm, centre height +/-0.025mm
Holders: Shank sizes 0810, 1010, 1212 and 1616 available in left and right handed versions.
| | Features
The VCEX insert designed for back-turning as well as turning and has a high edge strength and can easily cope with large cutting depths as well as high feeds. This insert generates a good surface finish. |
Cutting depth
 Feed
Cutting depth: (ap) mm
Feed: (fn) mm/r
Cutting speed recommendations
Grade 1025, (vc) m/min |
90-125 | | 
95-115 | | 
95-200 | | 
10-15 |
|
|
|
| |
| 1. | To ensure low radial forces, use a holder with 90 degree entering angle, ex. SVABR 1212M11-S-B1. |
| 2. | To ensure best edge strength choose grade 1020. However, if a shiny surface finish is the prime consideration, choose the 5015 Cermet grade. |
| 3. | For components with finished diameters less than 12 mm it is recommended to use the CoroCut XS backturning insert as this is designed to be closer to the guide-bush or chuck. |
|
|