For parting we offer dedicated geometries with the CoroCut system. These geometries are designed to make the chip narrower than the groove and to give excellent chip control.
The geometries are designed for high feed (CR), medium feed (CM) and low feed (CF). For extremely low feed and lowest possible cutting forces we offer the CS-geometry.
Radial feed
insert width (la),
3.0 m |  |
 | Feed (fn),
mm/r |
| Recommended starting value |
| First choice |
|
The CoroCut 1- and 2-edge solutions offer excellent stability and give good results at medium cutting depth.
For small cutting depths CoroCut3 is the first choice.
For large cutting depths CoroCut 1-edge is the first choice and Q-Cut 151.2 is second choice. | |