Multi-task machining
– tooling possibilities
Turning is an operation for lathes, turning centres and now even machining centres. All operations, including turning, milling, contouring and milling of angled surfaces and grinding, can be achieved in one machine set up.
Coromant Capto® can and has fulfilled all requirements for this large range of demands. With its broad program of tools, using the same self-centering coupling for a wide application area, the system has been successfully equipped in all major multi-task machines. | |
Coromant Capto®
Coromant Capto – the only true universal tool system covering all metal cutting operations, equally effective in turning, milling, drilling and boring.
| |
| |
| Tools for high-pressure coolant
The ability to increase cutting speed in roughing by 20% and tool life in roughing to finishing by 50% makes this pioneering system an essential for every multi-task machine, turning centre and vertical turning lathe.
|
|
| CoroPlex™ – innovative multifunctional tools |
 |
CoroPlex™ MT
|
| |
 |
CoroPlex™ TT
|
| |
 |
CoroPlex™ SL
|
|
Machine investments
Let's work together to pay off your machine.
Much faster. |
|
|
| | Coromant Capto shank tool adaptors
| The Coromant Capto shank tool adaptors offer the possibility of using shank tools also in a multi-task machine tool with an integrated Coromant Capto spindle.
|
|
See the possibilities and smart combinations
Our wide range of more than 5,000 Coromant Capto standard products allow enormous possibilities to build special tool solutions for all requirements.
Read about multi-task machining in our Metalcutting Technical Guide
 Metalcutting Technical Guide 
| |
|
| |
|
|
|